| CS.RIN.RU - Steam Underground Community http://cs.rin.ru/forum/ |
|
| [Release] CF Toolbox 1.1.3 http://cs.rin.ru/forum/viewtopic.php?f=29&t=46724 |
Page 127 of 137 |
| Author: | illpillow [ Sunday, 02 Dec 2012, 17:23 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
Could be a problem with CDR, have you tried loading an old version of it? |
|
| Author: | .Rar [ Sunday, 02 Dec 2012, 19:58 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
Mine works fine. I have automatic update of the CDR on startup disabled in case that's the key. |
|
| Author: | sansandrei [ Sunday, 02 Dec 2012, 20:34 ] |
| Post subject: | Re: FAQ and Guide |
Hello, i have a problem with CFtoolbox http://www.noelshack.com/2012-48-135446 ... itre-2.png Can you help me ? |
|
| Author: | joost138 [ Sunday, 02 Dec 2012, 22:32 ] |
| Post subject: | CF Toolbox 1.1.1 |
Hey everyone, I tried searching for a fix through the forums, but I could not find anything, it seems the poster above me has the exact same problem. When trying to load up CF Toolbox and selecting the steamapps folder it starts reading the: GCF/NCF files, but when it's done, windows gives me an error. CF Toolbox.exe has stopped working. I tried downloading a different version and running in it compatility mode. Also restarted my PC and deleted all of the CF Toolbox files. Can anyone help me? Kind regards, Joost EDIT: Also tried with an empty folder, even then it crashes. |
|
| Author: | tsivour [ Sunday, 02 Dec 2012, 23:55 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
How can you disable CDR? CFToolbox crashes before even it opens.... Also, in general, if anyone found a fix of that problem of the CFToolbox crash please share it, its been 3 days now and my gcf/ncf collection had already started to get seriously outdated...... Nick and Kathrine |
|
| Author: | .Rar [ Monday, 03 Dec 2012, 01:07 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
If you already had a working install, use Da_FileServer's ClientRegistry Toolkit to open CFToolboxRegistry.blob. Locate the "automaticCDRUpdate" entry under "Config", and set its value to 0. If it doesn't exist, create a DWORD with that name, then set the value. If you're making a new install, try extracting the following archive to the directory where CF Toolbox is installed, then run the program.
After doing that, it works for me. However, when I tried to update the content description record manually via the preferences tab, it lagged for a long time, then crashed silently. This might make it work, but is not a real solution, as an updated CDR is necessary for CFT to be aware of changes in Steam's catalog. |
|
| Author: | sam2k8 [ Monday, 03 Dec 2012, 02:06 ] |
| Post subject: | Re: CF Toolbox 1.0.13 |
Let me quote this from July 2011: steamCooker wrote: well it's cause it's coded like crap ... the CDR became to large for some buffers ... fixed it  viewtopic.php?p=752068#p752068 Probably it's too large again for some buffers. 
|
|
| Author: | tsivour [ Monday, 03 Dec 2012, 16:27 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
The disabling CDR trick works fine but it is not a solution since the files cant get updated descriptions. Whatever kind of description record updating ends up on CFT crash anyway..... Lets hope someone will fix the issue soon, maybe steamCooker needs to compile a new CFT version after all Nick and Kathrine |
|
| Author: | itigr [ Monday, 03 Dec 2012, 19:41 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
it's not working on windows 8 |
|
| Author: | steamCooker [ Monday, 03 Dec 2012, 21:23 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
it's not working at all anymore ... i'll check that but i don't have the source code for now |
|
| Author: | tsivour [ Tuesday, 04 Dec 2012, 22:46 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
Hey steamCooker save us!!! CFT is the best gcf/ncf software updater ever, steam cant resume updating over original description content, it moslt locks free releases Steam Buster can launch.... Gogo steamCooker, do your thingy, you are our only hope, please fix CFT Nick and Kathrine |
|
| Author: | Goar5 [ Thursday, 06 Dec 2012, 21:37 ] |
| Post subject: | Re: CF Toolbox 1.1.1 |
steamCooker wrote: ... i'll check that but i don't have the source code for now If you can find it "again", then, please, publish that as an "OPEN source" project.I know, you have no (or I should better say: won't) intention to improve in this CFT project anymore, but I would do it (min. for myself) ... And ... it would prevent to lost the source "again"!
|
|
| Author: | steamCooker [ Thursday, 06 Dec 2012, 21:42 ] |
| Post subject: | Re: CF Toolbox 1.1.2 |
Code wasn't lost, I just hadn't it with me here, check first post for the new fixed version ! |
|
| Author: | .Rar [ Thursday, 06 Dec 2012, 21:51 ] |
| Post subject: | Re: CF Toolbox 1.1.2 |
Thanks for the update! |
|
| Author: | Goar5 [ Thursday, 06 Dec 2012, 22:05 ] |
| Post subject: | Re: CF Toolbox 1.1.2 |
And HOW you solve it? By just higher the values for buffers spaces (static), or do you implement a dynamic memory allocation for this? I'm asking, because I'm thinking forward to next 1/2 year (when next growing CDR overflowes the buffer's sizes). 
|
|
| Page 127 of 137 | All times are UTC + 3 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
